Gaggenau 90 cm AL 200 190 hood with clear glass finish
GlassDraft class A 200 series telescopic top-mounted suction center
Use the Coupon NEWREG10: for new registered 10.00 euro discount
Gaggenau 90 cm AL 200 190 countertop hood with clear glass finish
Cod. AL 200 190
Cod. EAN 4242006292829
Performance:
- Performance and noise: 3 power levels + intensive
- Max. suction (according to DIN EN 61591):
- Extraction: 519/833 m3 / h
- Recirculation: 472/620 m3 / h
- Sound power (according to EN 60704-3):
- Extraction: 62/71 dB (A) re 1 pW
- Recirculation: 65/71 dB (A ) re 1 pW
- Odor reduction rate greater than 90%
Features:
- Suction with integrated deck control (with compatible model)
- Automatic sensor operation option
- 3 electronically controlled power levels and intensive operation mode
- Grease filter saturation indicator
- Activated carbon filter saturation indicator
- 2 large metal grease filters, easy to remove, dishwasher safe
- Collection capacity of the anti-fat filter 170 ml. Additional 600 ml collection capacity in the motor unit
- Activated carbon filter easily removable from the top for air recirculation
- Panel frame in anodized aluminum in Gaggenau Black finish
- 1 control panel for setting power levels and 1 control panel for Guided Air technology
- BLDC brushless electromagnetic motor operating technology for high efficiency top
- Flexible installation of the motors in the front (for compact wall-mounted solutions), rear (for solutions without loss of drawer depth) or remotely from the appliance
- Home Connect: Digital services integrated with the home network via WiFi
- The operation of the Home Connect mode depends on the availability of the Home Connect service in each country
Values consumption:
- Energy efficiency class A
- Energy consumption 3 7.8 kWh / year
- Ventilation efficiency class: A
- Filter efficiency class: C
- Min. 41 db / max. 62 db with normal suction level
Mounting precautions:
- Can be combined with 400 Series induction hobs (CX 492) or Series 200 (CI 292), in a single recessed hole
- For installation in a single recessed hole, the installation accessory must be positioned between the luminaires. This includes a connecting element and a support for the worktop capable of guaranteeing the stability of the cabinet
- The hood can be installed in a cabinet or between two pieces of furniture (e.g. for installation on island on surfaces deeper than 100 cm)
- Cabinet depth 90 cm, 100 cm or 120 cm
- Do not install wall units above the countertop hood to ensure optimal performance
- The following distances must be respected:
- 50 cm from high walls or furniture to the left and right of the hood
- 5 cm from the wall with respect to the frame of the hood
- 2 cm from the Guided Air air capture area to the cabinet wall
- The installation is possible in stone, synthetic or solid wood. The thermal resistance and watertightness of the edges of the notch must be respected
- In case of positioning the motor unit at a distance, an installation kit is required (with components useful for closing the outputs of the 'air). IMPORTANT: maximum distance from the hood 3 m
- In the air extraction mode, a one-way deflector must be installed with a maximum opening pressure of 65 Pa
- In the extraction mode air, always ensure an adequate supply of air entering the room if the appliance is operated at the same time as the presence of an active ventilated fireplace
- For optimal performance in air recirculation, a drainage surface of at least 440 cm2
- For the air recirculation mode it is necessary to use the dedicated module
Connection values:
- Total consumption 300 W
- 1.3 m connection cable with plug
- Check the manual to switch off the WiFi module
Data sheet
- Noisiness
- 62 dBA
- Dimensions (WxHxD)
- 908x1303x140 mm
- Finishing
- Nero e Vetro
- Energy rating
- A
- Typology
- From Piano
- Max Speed
- 833 m3/h
- Consegna
- Pronta Consegna
How does Opportunity Commerce ship?
In this section we will show you how your products, ordered and ready, are prepared for shipment from our warehouse:
PHASE 1 -> The products arriving in our warehouse are handled by our expert staff with suitable equipment;;
PHASE 2 -> Before being shipped, each product is placed on a customized wooden pallet and strapped (tied) to it with special welded straps; in such a way as to induce the movement of the products by our couriers only through the use of pallet trucks and forklifts;
PHASE 3->The most fragile, valuable products, and with glass components are further protected with: protected with: custom-made wooden panels, bubble wrap, additional protective cardboard..
For more information on the couriers used and how to receive the products, consult the following page: https://www.opportunitycommerce.com/gb/content/1-shipping
Below are photographic examples of some of our shipments:
HOME APPLIANCES
FURNITURE
COMPLETE PACKAGES