Foster Corner gas hob 7038 052 stainless steel finish 83x83 cm
Use the Coupon NEWREG10: for new registered 10.00 euro discount*
* with a minimum purchase of only 200 euros
Foster corner gas hob 7038 052 stainless steel finish 83x83 cm
Cod. 7038052
Code. EAN 8033524372010
General
• Standard Installation Edge (8 mm Edge)
• Finish Brushed Foster
• Material AISI 304 stainless steel
• Texture Brushing in line
• Power supply 220-240 V; 50/60 Hz
• Dimensions 830x830 mm
• Base dimensions 83cm
• Complete description Corner gas hob 83x83 cm - 5 burners - STD edge - for built-in overtop
• Element 5 burner heating element
• Built-in hole See technical data sheet
• Grids Cast iron grids and enamelled burner covers
• Total power 9,750 W
• Auxiliary 1,000 W
• Semi-rapid 3x1. 750 W
• Triple crown 3,500 W
• Safety Safety valve with rapid intervention thermocouple
• Ignition type Electric ignition under the knob
• Gas type Tested for installation with methane gas, set of LPG nozzles included
• Type of gas hob
Under-knob ignition
Maximum freedom of movement with the Electric ignition under the knob, a feature common to all models, which allows the flame to be activated with just one hand
Special burners
Many Foster hobs are equipped with special burners, with two or three crowns of fire which greatly increase the power supplied and the directly heated surface.
Safe cooking
All Foster hobs are equipped with safety valves which, in the event of accidental when the flame goes out, they interrupt the gas supply very quickly
Cast iron grills
Cast iron it is the perfect material for the grill of a hob due to the many properties that distinguish it: high thermal capacity which improves cooking performance; weight and stability that improve safety; robustness that keeps the original appearance unchanged over time
Data sheet
- Dimensions (WxHxD)
- 830x50x830 mm
- Finishing
- Inox
- Cooking areas
- 5
- Total absorption
- 9.75 kW
- Grids
- Cast iron
- Installation
- Built-in
How does Opportunity Commerce ship?
In this section we will show you how your products, ordered and ready, are prepared for shipment from our warehouse:
PHASE 1 -> The products arriving in our warehouse are handled by our expert staff with suitable equipment;;
PHASE 2 -> Before being shipped, each product is placed on a customized wooden pallet and strapped (tied) to it with special welded straps; in such a way as to induce the movement of the products by our couriers only through the use of pallet trucks and forklifts;
PHASE 3->The most fragile, valuable products, and with glass components are further protected with: protected with: custom-made wooden panels, bubble wrap, additional protective cardboard..
For more information on the couriers used and how to receive the products, consult the following page: https://www.opportunitycommerce.com/gb/content/1-shipping
Below are photographic examples of some of our shipments:
HOME APPLIANCES
FURNITURE
COMPLETE PACKAGES