Gaggenau VI 422 115 induction hob with 38 cm stainless steel frame
Use the Coupon NEWREG10: for new registered 10.00 euro discount*
* with a minimum purchase of only 200 euros
Gaggenau VI 422 115 induction hob with 38 cm stainless steel frame
Cod. VI 422 115
• Solid stainless steel knobs, also available in black finish, for precise and customizable control
• Flex function to combine rectangular cooking zones
• Free positioning of pots and pans inside the rectangular cooking zones
• Precise manufacturing of 3 mm thick steel
• Possible free-standing or flush-mount installation
• Perfect combination with all the appliances of the Vario series 400
Cooking zones
• 2 flexi zones measuring 19x24 cm (2200 W, with 3700 W booster), if combined they reach the size of 38x24 cm (3300 W , with 3700 W booster)
Operation
• Knobs with luminous ring and silk-screen printing for cooking zones and power levels
• Electronic power control at 12 levels
• User friendly control with 2 color display (white/orange)
Features
• Flex function for rectangular zones
• Frying sensor
• Booster function
• Stopwatch
• Minute minder
• Options menu
• Power Management function: electronic regulation and limitation of electrical absorption depending on the need
Home Connect
• Integrated extraction system control (with compatible hood model)
• Remote control
• Diagnosis remotely
• Integrated digital services (Home Connect) with the wireless home network via WiFi
• The operation of the Home Connect mode depends on the availability of the Home Connect service in each country. For further information visit www.home-connect.com
Safety
• Operation indicator light
• Pan recognition system
• Indicator of 2-stage residual heat
• Safety switch
Mounting precautions
• Depending on the type of installation (free-standing or flush), the configuration of the cutout and the position of the knob may vary
• It is advisable to align knobs and cooking zones
• Always respect the drawings relating to the installation of the knobs. If the panel is thicker than 23 mm, provide a space on the rear side
• If multiple devices from the Vario 400 series are combined, it is necessary to use the VA 420 connecting element between the various devices. Depending on the type of installation, the corresponding connecting element must be provided
• The load-bearing capacity and stability, particularly in the case of thin worktops, must be supported by suitable substructures. Take into account the weight of the appliance and additional loads
• Additional instructions for flush installation: Installation is possible in stone, synthetic or solid wood surfaces. The thermal resistance and watertightness of the edges of the cut must be respected. Regarding other materials, please consult the manufacturer of the worktop
• The groove must be continuous and uniform, so as to guarantee the correct positioning of the appliance on the gasket. Do not use a discontinuous covering
• The width of the joint may vary due to dimensional tolerances of the combinations and the cutout on the worktop
• If you install multiple appliances in single niches, provide a space of at least 50 mm between the niches
• To be used only with ferromagnetic pans
• The appliance is equipped with fixing springs which block the hob after insertion from above
• Weight of the appliance approx 9 kg
Connection values
• Total absorption 3.7 kW
• Connection cable length 1.5 m without plug
• Standby consumption /display OFF 0.5 W
• Standby/network consumption 1.4 W
• Check the manual to turn off the WiFi module
Data sheet
- Dimensions (WxHxD)
- 380x57x520 mm
- Finishing
- Black glass ceramic
Nero con Cornice Inox - Cooking areas
- 2
- Grids
- No
- Installation
- Appoggio
Filotop
How does Opportunity Commerce ship?
In this section we will show you how your products, ordered and ready, are prepared for shipment from our warehouse:
PHASE 1 -> The products arriving in our warehouse are handled by our expert staff with suitable equipment;;
PHASE 2 -> Before being shipped, each product is placed on a customized wooden pallet and strapped (tied) to it with special welded straps; in such a way as to induce the movement of the products by our couriers only through the use of pallet trucks and forklifts;
PHASE 3->The most fragile, valuable products, and with glass components are further protected with: protected with: custom-made wooden panels, bubble wrap, additional protective cardboard..
For more information on the couriers used and how to receive the products, consult the following page: https://www.opportunitycommerce.com/gb/content/1-shipping
Below are photographic examples of some of our shipments:
HOME APPLIANCES
FURNITURE
COMPLETE PACKAGES