Gaggenau VI 414 115 induction wok hob with 38 cm stainless steel frame

Cod. VI 414 115

• 32 cm cooking area with booster function
• Precise manufacturing of 3 mm thick steel
• Possible free-standing or flush-to-top installation
• Ideal for use with the Wok pan and its ring
• Perfect combination with all appliances from the Vario 400 series

Cooking zones
• 1 induction zone Ø 21 cm (2200 W, with 3700 W booster), which automatically extends to Ø 26 cm (2600 W, with 3700 W booster) and to Ø 32 cm (3300 W, with 3700 W booster)

Operation
• Knobs with luminous ring and silk-screen printing for cooking zones and power levels
• 12-level electronic power control
• User friendly control with 2-color display (white/orange)

Features
• Frying sensor
• Booster function
• Stopwatch
• Minute minder
• Options menu
• Power Management function: electronic regulation and limitation of electrical absorption according to need

Home Connect
• Integrated extraction system control (with compatible hood model)
• Remote control
• Remote diagnosis
• Integrated digital services (Home Connect) with the wireless home network via WiFi
• The operation of the Home Connect mode depends on the availability of the Home Connect service in each country. For further information visit www.home-connect.com

Safety
• Operation indicator light
• Pan recognition system
• Indicator of 2-stage residual heat
• Safety switch

Mounting precautions
• Depending on the type of installation (free-standing or flush), the notch configuration and knob position may vary
• Always respect the drawings relating to the installation of the knobs. If the panel is thicker than 23 mm, provide a space on the rear side
• If multiple devices from the Vario 400 series are combined, it is necessary to use the VA 420 connecting element between the various devices. Depending on the type of installation, the corresponding connecting element must be provided
• The load-bearing capacity and stability, particularly in the case of thin worktops, must be supported by suitable substructures. Take into account the weight of the appliance and additional loads
• Additional instructions for flush installation: Installation is possible in stone, synthetic or solid wood surfaces. The thermal resistance and watertightness of the edges of the cut must be respected. Regarding other materials, please consult the manufacturer of the worktop
• The groove must be continuous and uniform, so as to guarantee the correct positioning of the appliance on the gasket. Do not use a discontinuous covering
• The width of the joint may vary due to dimensional tolerances of the combinations and the cutout on the worktop
• If you install multiple appliances in single niches, provide a space of at least 50 mm between the niches
• To be used only with ferromagnetic pans
• The appliance is equipped with fixing springs which block the hob after insertion from above
• Weight of the appliance approx 9 kg

Connection values
• Total absorption 3.7 kW
• Connection cable length 1.5 m without plug
• Standby consumption /display OFF 0.5 W
• Standby/network consumption 1.4 W
• Check the manual to turn off the WiFi module