Gaggenau 80 cm VI 482 105 induction hob

Cod. VI 482 105

• Flex function to combine rectangular cooking zones
• Free positioning of pots and pans inside the cooking zones with automatic extension up to 30 cm wide
• Without frame for insertion flush with the top
• Perfect combination with all the appliances of the Vario 400 series

Cooking zones
• 2 Flex zones each 20x23 cm (2200 W, with 3700 W booster), if combined 40x23 cm (3300 W, with 3700 W booster), with automatic extension up to 30x32 cm (3300 W, with 3700 W booster)
• 2 Flex zones each measuring 20x23 cm (2200 W, with 3700 W booster), if combined 40x23 cm (3300 W, with 3700 W booster), with automatic extension up to 30x32 cm (3300 W, with 3700 W booster)

Operation
• Knobs with luminous ring and silk-screen printing for cooking zones and power levels
• 12-level electronic power control
• User control friendly with 2-color display (white/orange)

Features
• Flex function for rectangular areas
• Frying sensor
• Function Booster
• Stopwatch
• Minute minder
• Options menu
• Power Management function: electronic regulation and limitation of electrical absorption according to need

Home Connect
• Integrated extraction system control (with compatible hood model)
• Remote control
• Remote diagnosis
• Integrated digital services (Home Connect) with your wireless home network via WiFi
• The operation of the Home Connect mode depends on the availability of the Home Connect service in each country. For further information visit www.home-connect.com

Safety
• Operation indicator light
• Pan recognition system
• Indicator 2-stage residual heat
• Safety switch

Assembly precautions
• It is advisable to align knobs and cooking zones
• Respect always the drawings relating to the installation of the knobs. If the panel is thicker than 23 mm, provide space on the back side
• The load-bearing capacity and stability, particularly in the case of thin worktops, must be supported by suitable substructures. Take into account the weight of the appliance and additional loads
• Installation is possible in stone, synthetic or solid wood surfaces. The thermal resistance and watertightness of the edges of the cut must be respected. Regarding other materials, please consult the manufacturer of the worktop
• The groove must be continuous and uniform, so as to guarantee the correct positioning of the appliance on the gasket. Do not use a discontinuous covering
• The width of the joint may vary due to dimensional tolerances of the combinations and the cutout on the worktop
• If you install multiple appliances in single niches, provide a space of at least 50 mm between the niches
• To be used only with ferromagnetic pans
• The Wok pan - WP 400001- cannot be used on this hob
• The appliance is equipped with fixing springs that block the hob after insertion from above
• Appliance weight approx. 18 kg

Connection values
• Total absorption 7.4 kW
• Connection cable length 1.5 m without plug
• Consumption in standby/display OFF 0.5 W
• Consumption in standby/network 1.7 W
• Check the manual to turn off the WiFi module