La Nordica Wood-fired thermo stove TERMOROSSELLA PLUS EVO DSA 4.0 7117271 burgundy liberty finish

Model TERMOROSSELLA PLUS EVO DSA 4.0

Cod. 7117271

Code. EAN 8022724000656

TECHNICAL DATA
• Nominal power 11.1 kW-N
• Power delivered to water 8.0 kW-H2O
• Efficiency 88.0 %
• Hourly consumption 3.0 kg/h
• Dimensions (LxHxD) 559x915x533 mm
• Net weight 162 kg
• Fume exhaust diameter (Ø) 130 mm S
• Fire mouth size (LxH) 355x220 mm
• Firebox size (WxHxD) 307x347x345 mm
• Wood max length 30 cm
• Operating pressure 3 bar

FEATURES
• Steel / cast iron hearth
• Enamelled cast iron door
• Removable ash drawer
• Adjustable primary and secondary air for better combustion management
• Post-combustion system for low emissions
• Air thermostatic valve
• Ceramic glass
• Predisposition for DSA safety device (DSA valve optional)

OPTIONS
• Post combustion
• Cast iron doors
• Automatic safety device
• Glass cleaning system
• External air intake (ASC )

OPTIONAL
• Additional ventilation ring Ø 100 mm cod. 6035510
• Automatic thermal exhaust valve DSA cod. 7118400

It's time to think about your system
La Nordica-Extraflame continues the line of wood-burning products by adding the possibility of connecting them to the thermo-hydraulic system of the home, supplying hot water to the radiators
La Nordica-Extraflame, thanks to the wide choice of thermo stoves, is able to offer the right solution to heat your home efficiently and ecologically
In fact, these products designed and manufactured with the most advanced technologies, they heat the whole house with an excellent caloric yield, a low consumption of wood and with complete respect for the environment
It is important to remember that to have the guarantee it is mandatory to insert an Anti-condensation Mixing Valve to prevent the return of cold water into the exchanger

What is the "DSA System":
It is a safety heat exchanger that allows you to install the products in a "closed vessel"
At the entrance of the DSA system (exchanger with fittings), already pre-installed on the generator, the automatic DSA thermal discharge valve (optional) must then be connected