Sedit Wave extendable table with metal structure and top of your choice

WAVE by Sedit is an unusual and original table that stands out for the interweaving of the structure which, with its geometries studied in detail , favors the perception of lightness and modernity, enhancing the style of your living room

The Wave table, shown here in the extendable version, is only available with a rectangular top, which can be made in lengths of 180, 200 or 220 cm and depth of 100 cm

The table is proposed here with 2 different types of extensions, namely:
• with One System opening system, thanks to which, in a few simple steps , the table increases in size and style: two brackets on each side are placed under the table top and, if necessary, come out with a sliding movement. The extension leaves are placed and hooked onto the guides but, when they are not needed, they are removed to be kept in a space of your choice, while the brackets retract
• with the Up System opening system, a very practical system which allows you to extend the table without sacrificing style: two extensions are placed under the table top, at the ends of a sliding rail. To lengthen the table, slide the rail outwards and raise it slightly: in this way the extension leaves come out and are positioned flush with the main top.

The Wave table has an epoxy powder coated metal structure, available in the standard matt finishes Chalk White, Anthracite and Mud, and in 10 optional finishes available at an extra cost
The table top instead it can be made in various material textures with a wood, stone, concrete or lacquered effect, as well as in ceramic (Elegance or Premium) and wood (Natural Oak, Carbon Oak and Termocotto Oak); the top with wooden finish is available exclusively for the table with One System extension system
The top has a straight edge for all finishes, with the exception of the table with One System opening system with ceramic top, which has a profile with a 45° angle

Technical features:

• Extendable table
• Height from the ground: 75 cm
• Structure in epoxy powder coated metal
• Top thickness and type of edge:
> Wave One System table:
material: 3 cm (straight profile)
ceramic: 3.6 cm (45° inclined profile) - Oxide White and Oxide black finishes not available
wood: 4 cm (straight profile)
> TableWaveUp System:
material: 2 cm (straight profile)
ceramic: 1.4 cm (straight profile)

Measurements:
L 180 (230-280) x H 75 x P 100 cm
L 200 (250-300) x H 75 x P 100 cm
L 220 (270-320) x H 75 x D 100 cm

Notes:The Wave table is also available in the fixed version