Gaggenau 32 cm CU421100 induction module

Cod. CU 421 100

Cod. EAN 4242006310714

• Solid stainless steel knobs, also available in black finish, for precise and customisable control
• Central cooking zone light to indicate operating status or residual heat
• Customization options ensure the creation of a bespoke kitchen aesthetic
• Modular and flexible induction modules
• Integrates seamlessly into any living space, enhancing both functionality and kitchen aesthetics
• Use of pots and pans directly on the 12 mm Dekton worktop
• Integrated 21 cm induction cooking zone with booster function
• Perfectly combinable with other integrated induction modules of the 400 series

Cooking zones
• 1 induction cooking zone Ø 21 cm (2000 W, with booster 2300 W)

Operation
• Knobs with illuminated ring and silkscreen printing for the cooking zones and power levels
• 12-level electronic power control
• Central cooking zone indicator light

Features
• Booster function
• Keep warm function
• Options menu

Safety
• Only works with surface protectors
• Operation indicator light
• Pan recognition system
• Indication of two-phase residual heat directly on the worktop and on the knob
• Safety switch

Assembly precautions
• The integrated induction module must be installed under a 12mm thick Dekton worktop
• The load-bearing capacity and stability must be supported by suitable substructures. Take into account the weight of the appliance and additional loads
• A 10 mm hole must be provided in the centre of the cooking zone. Markings must be provided to indicate the cooking zone
• No other cuts are permitted in the same slab as the worktop
• Dekton is processed by local marble workers; For a list of recommended stone cutters, contact your local Cosentino representative
• For stone cutters working with Dekton: see the Cosentino "Gaggenau Induction Marking and Drilling Protocol" technical sheet
• Minimum distances:
From the centre of the cooking zone to the side edge of the worktop 350 mm
Centre of the cooking zone to the front and back edge of the worktop 400 mm
From the centre of the cooking zone to the centre of the next cooking zone 350 mm or 450 mm depending on the combination
• The minimum distances from the rear wall of the cabinet and from the openings are indicated in the dimensioned drawings
• To be used only with ferromagnetic pans
• Weight of the appliance approx. 6 kg

Connection values
• Total power consumption 2.3 kW
• Connection cable length 1.5 m without plug
• Connection cable length 1 m for the control knob

NB: The knobs are optional accessories