Flos Suspension lamp with diffused light LED Skygarden 1 in different finishes
Circular pendant lamp of the Flos brand in plaster / glass / stainless steel | Suitable for indoor use | Designer: Marcel Wanders, 2007
Use the Coupon NEWREG10: for new registered 10.00 euro discount*
* with a minimum purchase of only 200 euros
Flos Suspension lamp with diffused light LED Skygarden 1 in different finishes
Specifications:
- Rooms: for interiors
- Voltage: 220-250V
- Power: 105W
- Weight: 13 kg
- Cable length: 2700 mm
- 2 years warranty
Note:As a rule, this product is supplied without bulbs.
Dimensions:
- Diameter: Ø60 cm
- Height: 30 cm
Suspension lamp providing diffused light. Dome in cast plaster, mechanically worked and painted white inside, while the chromatic finishes on the outside can be: rust, glossy black, glossy white or matt gold. Dome support in molded plaster of die-cast aluminum alloy painted in white liquid. Upper bushing in die-cast aluminum alloy, polished and protected with transparent paint on the entire visible part. Black injection-molded PC (polycarbonate) upper cable guide and adjustment locking ring nut. Adjustment screw in turned and galvanized steel. Upper and lower shock absorbers in transparent injection-molded silicone. Lamp holder and support fixing in black injection molded PPS (Polyphenylene Sulfide). Mouth blown cased opaline glass diffuser. Glass fixing ring molded in die-cast aluminum alloy and finished with alodine chrome plating. Skygarden 1 frieze in photo-etched and mechanically drawn AISI 304 stainless steel. Ceiling attachment in pressed and galvanized steel. Injection-molded gray PA6 (Nylon) rosette with 30% fiberglass filler.
Data sheet
- Finishing
- Black
Nero Opaco
Oro
Ruggine
White - Lighting
- LED
- Material
- Acciaio Inox
Gesso
Vetro - Height
- 30 cm
- Diametro
- Ø60 cm
- Luminosità
- 2300 LM
- Forma
- Circolare
- Ambiente
- Interno
How does Opportunity Commerce ship?
In this section we will show you how your products, ordered and ready, are prepared for shipment from our warehouse:
PHASE 1 -> The products arriving in our warehouse are handled by our expert staff with suitable equipment;;
PHASE 2 -> Before being shipped, each product is placed on a customized wooden pallet and strapped (tied) to it with special welded straps; in such a way as to induce the movement of the products by our couriers only through the use of pallet trucks and forklifts;
PHASE 3->The most fragile, valuable products, and with glass components are further protected with: protected with: custom-made wooden panels, bubble wrap, additional protective cardboard..
For more information on the couriers used and how to receive the products, consult the following page: https://www.opportunitycommerce.com/gb/content/1-shipping
Below are photographic examples of some of our shipments:
HOME APPLIANCES
FURNITURE
COMPLETE PACKAGES